Frequently Asked Questions
-
What is a warehouse layout generator?
A warehouse layout generator turns your building dimensions and pallet data into a draft storage layout showing racks, aisles or lanes, pallet positions and estimated throughput. Addverb's generator produces layouts for Skyron crane ASRS and Cruiser 360 4-way pallet shuttle systems. It gives you a starting point to compare options before a full design study.
-
Is the Addverb warehouse layout generator free?
Yes, Addverb's warehouse layout generator is free: you enter your building and pallet details and receive a 2D layout with estimated throughput by email within 24 hours. Reply with your layout to [email protected] and your requirement, an Addverb engineer can then review the layout with you and discuss further solutions.
-
What information do I need to generate a warehouse layout?
You need your building's usable length, width and clear height, your pallet size, load height and maximum weight, and your peak pallets in and out per hour.
-
How accurate is a generated layout?
A generated layout is a preliminary estimate, good for comparing crane ASRS and 4-way shuttle options, but not a final design. Final pallet counts depend on a site survey covering columns, sprinklers, floor flatness and fire code, followed by throughput simulation.
-
How many stacker cranes does my warehouse need?
The number of stacker cranes depends on your peak pallet moves per hour divided by what one crane can deliver, which is up to 30 pallets per hour for Addverb's Skyron. Long or very tall aisles reduce cycles per hour, so the generator estimates throughput from your actual rack geometry.
-
What building height do I need for a crane ASRS?
A crane ASRS pays off most in tall buildings, and Addverb's Skyron stores pallets in racking up to 131 ft (40 m) high. In lower buildings, the crane's fixed aisle and approach space take a larger share of the volume, so a 4-way pallet shuttle often stores more pallets.
-
Should I choose single deep or double deep storage for a crane ASRS?
Choose single deep when you need fast access to every pallet and the highest throughput per aisle, and double deep when storage density matters more than cycle speed. Double deep storage holds more pallets per aisle but adds handling moves. Skyron also supports multi-deep storage using a child shuttle.
-
Can I expand a 4-way pallet shuttle system later?
Yes, you can expand an Addverb Cruiser 360 system by adding shuttles for more throughput or adding rack modules for more storage, as long as the original layout leaves space and control capacity for growth. Plan expansion zones in the first layout so you avoid rip-and-replace later.
-
Can a 4-way pallet shuttle fit into an existing warehouse?
Yes, a 4-way pallet shuttle system can fit an existing warehouse with retrofitting because its racking works around columns and fills wide, medium-height buildings. Floor flatness, slab load capacity and sprinkler layout need checking first.